Configuring Group-To-Role Mapping Parameters - HP 3PAR StoreServ 7200 2-node Administrator's Manual

◦
Eng
◦
Golfers
In this example, 3PARuser is not yet authenticated or authorized because 3PARuser's
group-to-role mapping has not been configured.

Configuring Group-To-Role Mapping Parameters

Once you have configured the group location parameters, you must now decide what role you
wish to assign the users for a given group. To configure group-to-role mapping:
1. Issue the setauthparam <map_param> <map_value> command, where:
<map_param> is one of the following:
◦
◦
◦
◦
◦
◦
◦
◦
<map_value> is the group to which the user has membership. You can specify multiple
groups with multiple <map_value> arguments.
For Active Directory, the group is displayed as a string of information as shown in the
following example:
CN=Software,CN=Users,DC=ACME,DC=com
2. Repeat Step 1
that user has membership.
32 Managing User Accounts and Connections
super-map—provides Super user rights within the specified group.
service-map—provides Service user rights within the specified group.
edit-map—provides Edit user rights within the specified group.
browse-map—provides Browse user rights within the specified group.
create-map—provides Create user rights within the specified group.
basic_edit-map—provides Basic Edit user rights within the specified group.
3PAR_AO-map—provides 3PAR AO user rights within the specified group.
3PAR_RM-map—provides 3PAR RM user rights within the specified group.
above if you wish to assign users a different role for another group to which