Growing Virtual Volumes In Domains; Freeing Virtual Volume Snapshot Space In Domains; Exporting Virtual Volumes In Domains; Creating Vlun Templates In The All Domain - HP 3PAR StoreServ 7200 2-node Administrator's Manual

See the HP 3PAR StoreServ Storage Concepts Guide and the setvv command in the HP 3PAR
Command Line Interface Reference for additional information about this restriction.
To modify a virtual volume in a domain, see

Growing Virtual Volumes in Domains

Existing domain virtual volumes can be enlarged (grown) by automatically adding capacity in
increments that you specify. Volumes which were created by Super or Edit users in the all domain
can only be grown by Super or Edit users in the all domain. Volumes created from CPGs by Edit
users in a specified domain can be grown by those users.
For instructions on growing domain virtual volumes, see

Freeing Virtual Volume Snapshot Space in Domains

The snapshot space in virtual volumes belonging to domains can be made available in the same
way that virtual volumes in systems without domains are made available.
For instructions on freeing virtual volume snapshot space, see
Space" (page

Exporting Virtual Volumes in Domains

Creating VLUN templates in domains is procedurally no different from creating VLUN templates
in systems that do not use virtual domains. If you are using virtual domains, you can export virtual
volumes in your domains. The right to perform inter-domain exports is determined by the user's
role.
Users with Super and Edit rights who belong to the all domain can export virtual volumes
in any domain existing in the system.
Users with Edit rights who belong to a specified domain can only export virtual volumes
to hosts belonging to that domain.

Creating VLUN Templates in the All Domain

You can create host sees, matched set, and port presents VLUN templates if you have Super or
Edit rights in the all domain. For instructions on creating each template type, see
Host Sees or Host Set VLUN Template" (page
Template" (page

Creating VLUN Templates in a Specific Domain

Edit users belonging to a specified domain can export virtual volumes to hosts belonging to
that domain. Only host sees and matched set VLUN templates may be created. For instructions on
creating each template type, see
and "Creating a Matched Set VLUN Template" (page

Moving a Common Provisioning Group to a Domain

For instructions on moving CPGs into or out of a domain, see
(page 60).
94 Managing CPGs and Virtual Volumes
88).
91), and "Creating a Matched Set VLUN Template" (page
"Creating a Host Sees or Host Set VLUN Template" (page 90)
"Modifying Virtual Volumes" (page
"Growing Virtual Volumes" (page
"Freeing Virtual Volume Snapshot
90), "Creating a Port Presents VLUN
91).
"Managing Domain Objects"
84).
84).
"Creating a
91).