Startup Files; Setting The Tpdstartfile Environment Variable On Solaris And Linux; Setting The Tpdstartfile Environment Variable On Windows; Comma Separated Values - HP 3PAR StoreServ 7200 2-node Administrator's Manual

2. In the Environment Variable dialog box, enter TPDCACHEDIR in the Variable box.
3. Enter the cache directory name in the Value box.
4. Click OK.

Startup Files

Startup files can be used to load user-defined procedures and commands. Setting the TPDSTARTFILE
environment variable causes the CLI to use a specific startup file when starting the CLI.
The TPDSTARTFILE environment variable is set differently in Solaris and Linux, and Windows.

Setting the TPDSTARTFILE Environment Variable on Solaris and Linux

To set the TPDSTARTFILE environment variable in Solaris and Linux, see the following system output
example. Substitute the name of your startup file for <startfile1> and use the correct syntax
for your shell.
$ TPDSTARTFILE=<startfile1>
$ export TPDSTARTFILE
$ cli

Setting the TPDSTARTFILE Environment Variable on Windows

To set the TPDSTARTFILE environment variable in Windows:
1. Perform Step 1
variable in Windows as described in
2. In the Environment Variable dialog box, enter TPDSTARTFILE in the Variable box.
3. Enter the startup file name in the Value box.
4. Click OK.

Comma Separated Values

HP 3PAR CLI output can be configured to display comma separated values so that data can be
easily input into spreadsheets. To set the output display, use:
The -csvtable global option.
The TPDCSVTABLE environment variable.
The setclienv csvtable command (if changing within the Tcl shell; see the HP 3PAR
Command Line Interface Reference for details about this command).
Once set, data is displayed as shown in the following example:
cli% showvv -csvtable
,,,,,,,,---Rsvd(MB)---,,,-(MB)-
Id,Name,Prov,Type,CopyOf,BsId,Rd,-Detailed_State-,Adm,Snp,Usr,VSize
0,admin,full,base,---,0,RW,normal,0,0,10240,10240
1,par,full,base,VV_01,1,RW,normal,128,512,16384,256
2,copy,cpvv,vcopy,VV_02,2,RW,normal,0,0,16384,5120
3,vvcp.1.2,tpvv,base,par,1,RO,normal,--,--,16384,10240
4,tpvv,full,base,VV_03,4,RW,normal,128,512,65536,10240
---------------------------------------------------------------------------------
5,total,,,,,,,256,1024,43008,36096
48 Running the HP 3PAR Command Line Interface
through Step 4 of the procedure for setting the TPDSOCKSSL environment
"Using SSL" (page 44).