Preferences / Audio Settings - Sanyo HVR-DX700 Instruction Manual

DG-M13-23E1D-HR-O(GB) 2006.7.14 3:59 PM

PREFERENCES / Audio Settings

Follow the same procedure as 'Video' Settings to
select 'Audio' Settings.
Preferences
Video
Audio
Parental Controls
Auto Settings
Hard Disk
Instructions:
Enter-Confirm Setup-Exit
Move ...†
Digital Output
1
Use [.../†] to select 'Digital Output' while the
'Audio' submenu is displayed.
2
Press [ENTER] or [√] to go to the second level.
3
Use [.../†] to select the desired digital output
Audio
Digital Output
Dynamic Range
Virtual Surround
Instructions:
Enter-Confirm Setup-Exit Move ...†
4
Press [ENTER] to confirm your selection.
5
Press [SETUP] to exit the menu.
Off
No signal will be output from the Digital Audio Out
jacks.
LPCM
Select when connected to a 2 channel digital stereo
amplifier. The HDD/DVD Recorder's digital audio
signal will be output in the PCM 2ch format when
you play a DVD (or HDD) recorded with a Dolby
Digital (only for DVD) or MPEG soundtrack. If the
DVD is recorded with a DTS sound track then no
sound will be heard.
˘ ` 25 mac001
Bitstream
Select when connected to a Dolby Digital or DTS
decoder (or an amplifier or other equipment with a
Dolby Digital or DTS decoder).
Dynamic Range
While watching DVD movies, you may wish to
compress the dynamic range of the audio output
N/A
(the difference between the loudest and quietest
passages). This allows you to listen to a movie at a
lower volume without losing clarity of sound. Set
'Dynamic Range' to Low or High for this effect.
Follow the same procedure as 'Digital Output' to set
the 'Dynamic Range'.
type.
Bitstream
Select Digital
Off
Output
Virtual Surround
Off
Off
Bitstream
You can enjoy a simulated 3D effect from two
speakers by setting Virtual Surround to On.
LPCM
Follow the same procedure as 'Digital Output' to set
the 'Virtual Surround' option.
1200DPI 100LPI
Setup menu
Audio
Digital Output Bitstream
Dynamic Range Off
Select Dynamic
Virtual Surround Off
Range
Off
Low
Instructions:
High
Enter-Confirm Setup-Exit Move ...†
Audio
Digital Output Bitstream
Dynamic Range Off
Virtual Surround Off
Select Virtual
Surround
Off
Instructions:
On
Enter-Confirm Setup-Exit Move ...†
25