Saving To Hdd - Sanyo HVR-DX700 Instruction Manual

DG-M13-23E1D-HR-O(GB) 2006.7.14 3:59 PM

Saving to HDD

Save
While viewing a program, press [REC]. This will
start saving the segment you are watching. You can
navigate forward. During the saving operation, by
pressing [REC], you will increase the length of the
program you are saving by 15 minutes up to a
maximum of 10 hours. Press [STOP] to indicate the
end of the saving operation. In case of recording a
part of Time shifting buffer, the buffer will be
empty.
You can not change the channel or the source if
saving is on-going (the end of the recording
segment is either not entered, or in case of a long
recording, it has not been reached.) Saving has to
be manually stopped first ( by pressing [STOP].) The
HDD/DVD Recorder will prompt you to Stop saving
first. The segment will be saved on the HDD and
then channel or source change will be performed.
The saved program will be removed from the Time
shifting buffer when it is about to be overwritten by
a Live recording. During recording from the Time
shifting buffer, [PLAY/PAUSE] dose not work as
pause(play) the recording but work as pause(play)
the broadcast in the buffer.
Indicates
recording to
the HDD and
Rec Speed
Indicates Time shifting operation: PLAY,
STILL, LIVE, STOP, FF, REW, etc
Other Operations in TIme shifting saving mode
While in Time shifting saving mode, you can use the
following keys for other operations: HDD, DVD,
MENU, OPEN/CLOSE, SETUP, INPUT, P.SCAN
buttons.
˘ ` 39 mac001 1200DPI 100LPI
• If the unit is set as "Setup –> Preferences
–> Hard Disk –> Auto Title Delete –> On"
if the [STOP] is not pressed and the recording
takes all the available space on the hard disk
drive, the HDD/DVD Recorder will erase
unprotected titles to the amount of about 10
hours in HQ mode (approx. 40GB) and keep
recording.
• If the unit is set as "Setup –> Preferences
–> Hard Disk –> Auto Title Delete –> Off"
if the [STOP] is not pressed and the recording
takes all the available space on the hard disk
drive, the HDD/DVD Recorder will stop
recording and prompt the user to erase some
titles and create more room on the HDD.
• If you want to stop recording in Time shifting
specific operation (FF, REW, STILL, etc), press
[STOP] to return to LIVE mode and then press
[STOP] again.
recording
Time shifting & Saving
39