5.
Install the four number 12-24 screws (included in the mounting bracket kit) into the upper and
lower holes in each bracket. Tighten these screws.
install and tighten the
other 12-24 screws
Figure 5.
Installing screws in brackets
© Copyright 2006, 2007 Hewlett-Packard
Development Company, LP. All rights reserved.
The information contained herein is subject to
change without notice.
This document contains proprietary information,
which is protected by copyright. No part of this
document may be photocopied, reproduced, or
translated into another language without the
prior written consent of Hewlett-Packard.
Technical information in this document is
subject to change without notice.
4
Part Number: 5991-8559
August 2007
Printed in Singapore
*5991-8559*