HP Cluster Platform Hardware Kits v2010 Hardware page 3
Hp procurve 5400 series rail kit (464794-doc)
Hide thumbs
Also See for Cluster Platform Hardware Kits v2010:
- Installation manual (20 pages) ,
- Installation manual (12 pages) ,
- Installation manual (10 pages)
Advertisement
3.
Use a #1 Phillips (cross-head) screwdriver to attach the mounting brackets to the switch with
the included 8-mm M4 screws. Each bracket is attached with four screws as shown in figure 3.
8 mm
M4 screws
Mounting
bracket
Figure 3.
Attaching Rack Mounting Brackets
4.
Slide the switch onto the rails in the rack until the mounting brackets are flush with the front
of the cabinet.
Figure 4.
Notches in Bracket Being Installed
3
Advertisement
