HP Cluster Platform Hardware Kits v2010 Hardware page 2
Hp procurve 5400 series rail kit (464794-doc)
Hide thumbs
Also See for Cluster Platform Hardware Kits v2010:
- Installation manual (20 pages) ,
- Installation manual (14 pages) ,
- Installation manual (14 pages)
Advertisement
2.
Use a #1 Phillips (cross-head) screwdriver and two included 8-mm M4 flat head screws to attach
a hold-down bracket to the chassis as shown in the following illustration. Ensure that each hold-
down bracket is positioned at the lower rear corners of the chassis.
8 mm
M4 screws
Hold down
bracket
Figure 2.
Attaching Hold-Down Bracket
2
Advertisement
