Remote Administration - LevelOne WBR-6000 User Manual

N_One Wireless Broadband Router

Remote Administration

If enabled, this feature allows you to manage the Wireless Broadband Router via the
Internet.
Data - Remote Administration Screen
Remote Administration
Enable Remote
Management
Current
IP Address
Port Number
To connect from a remote PC via the Internet
1. Ensure your Internet connection is established, and start your Web Browser.
2. In the "Address" bar, enter "HTTP://" followed by the Internet IP Address of the
Wireless Broadband Router. If the port number is not 80, the port number is also
required. (After the IP Address, enter ":" followed by the port number.)
e.g.
Figure 48: Remote Administration Screen
Check to allow administration/management via the Internet.
(To connect, see below).
If Disabled, this device will ignore Administration connection
attempts from the Internet.
This is the current address you will use when accessing this
device from the Internet. To connect, see details and an ex-
ample below.
Enter a port number between 1 and 65535. The default for
HTTP (Web) connections is port 80, but using port 80 will
prevent the use of a Web "Virtual Server" on your LAN. So
using a different port number is recommended. The default
value is 8080.
The port number must be specified in your Browser when you
connect. See the following section for details.
80