LevelOne WBR-6000 User Manual page 22

N_one wireless broadband router
Hide thumbs Also See for WBR-6000:
Table of Contents

Advertisement

N_One Wireless Broadband Router
Station name
SSID
Options
Mode
Channel No.
Broadcast
SSID
Wireless Security
Current Setting
Configure
Button
This is the same as the "Device Name" for the Wireless Broad-
band Router.
This is also called the "Network Name".
If using an ESS (Extended Service Set, with multiple access
points) this ID is called an ESSID (Extended Service Set
Identifier).
To communicate, all Wireless stations should use the same
SSID/ESSID.
Select the desired mode:
Off - Disable Wireless AP function.
802.11b - Only 802.11b connections are available. 802.11g
Wireless Stations will only be able to use the Wireless
Broadband Router if they are fully backward-compatible with
the 802.11b standard.
802.11b + g - Both 802.11.g and 802.11b Wireless stations
will be able to use the Wireless Broadband Router.
802.11b + g + n - 802.11g, 802.11b and 802.11n Draft
Wireless stations will be able to use the Wireless Broadband
Router.
802.11 g + n - Both 802.11.g and 802.11n Draft Wireless
stations will be able to use the Wireless Broadband Router.
802.11n - Only 802.11n Draft Wireless stations can use the
Wireless Broadband Router.
Select the Channel you wish to use on your Wireless LAN.
If you experience interference (shown by lost connections
and/or slow data transfers) you may need to experiment with
different channels.
If using multiple Access Points, adjacent Access Points
should use different Channels to reduce interference.
If enabled, the Wireless Broadband Router will broadcast its
SSID. This allows PCs and other wireless stations to detect this
Access Point and use the correct SSID. The default SSID is
WBR-6000
If disabled, PC users will have to manually enter the SSID and
other details of the wireless interface before they can connect to
this Access Point.
The current Wireless security is displayed. The default value is
Disabled.
Click this button to access the Wireless security sub-screen, and
view or change the settings. See the following section for details.
21

Advertisement

Table of Contents
loading

Table of Contents