LevelOne WBR-6000 User Manual page 62

N_One Wireless Broadband Router
Incoming Rules (Inbound Services)
This screen is displayed when the "Add" or "Edit" button for Incoming Rules is clicked.
Data - Incoming Rules Screen
Inbound Services
Service
Action
Send to
LAN Server
WAN Users
Figure 36: Inbound Services Screen
Select the desired Service. This determines which packets are
covered by this rule. If necessary, you can define a new Service
on the "Services" screen, by defining the protocols and port num-
bers used by the Service.
Select the desired action for packets covered by this rule:
•
ALLOW always
•
ALLOW by schedule, otherwise Block
•
BLOCK always
•
BLOCK by schedule, otherwise Allow
Note:
•
Any inbound traffic which is not allowed by rules you create
will be blocked by the Default rule.
•
BLOCK rules are only useful if the traffic is already covered by
an ALLOW rule. (That is, you wish to block a sub-set of traffic
which is currently allowed by another rule.)
•
To define the Schedule used in these selections, use the
"Schedule" screen.
Select the PC or Server on your LAN which will receive the in-
bound traffic covered by this rule.
These settings determine which packets are covered by the rule,
based on their source (WAN) IP address. Select the desired
61