Step 3: Connect The Cables - Toshiba PC-DKT User Manual

Step 3: Connect the Cables

Step 3: Connect the Cables
CAUTION!
1. Connect a 6-wire phone cable (supplied) between the
Strata DK and PC-DKT's Port 1.
2. (Optional) Connect a 6-wire phone cable between a
Digital Key Telephone and the PC-DKT's Port 2. This
backup phone operates normally when the PC-DKT
application is closed down or your PC is turned off.
If you do not connect a backup telephone, make sure
Note
you enter an extension in the Forward on Exit box
(see Page
3. Connect a 4-wire/8-wire phone cable (supplied) between
your fax/modem and PC-DKT's Port 3.
4. (Optional) Connect the special 4-wire/mini-plug cable
(supplied) between your PC sound card and PC-DKT's
Port 4. Make sure to match the IN mini-plug to the IN
jack on the sound card, and the OUT mini-plug to the
OUT jack on the sound card.
5. (Optional but highly recommended) Connect a cable
between a handset/cradle (option available) and the PC-
DKT's Port 5.
Note A headset may be used but it lacks the functionality of the cradle hookswitch.
If you use a 405Flex-MPS II headset, use the following settings: Transmit
Wheel = 7 or 8, Slide Switch = E.
14
———————————————————————————————————
Before connecting any cables in this step, make sure that you
are connecting the proper cable to the port. If you connect
the wrong cable, damage to the PC-DKT card, the PC and/or
the auxiliary equipment (e.g., modem, fax, etc.) can result.
17).
Strata
1
Phone
System
Power
2
Fail
Phone
Fax/
3
Modem
Multi-
4
Media
Handset/
5
Headset
2522
Strata DK PC-DKT