Dkt2000 Mode On/Off; Step 1: Turn Dkt2000 Mode On/Off; Step 2: Connect Cordless Telephone To Dp5000-Series Telephone - Toshiba Strata DP5000-UG-VC User Manual

Administrator Programming

DKT2000 Mode On/Off

DKT2000 Mode On/Off
Before a cordless telephone (DKT2204-CT or DKT2304-CT) can share a digital
station port with a DP5000-series telephone set, the port must be programmed into
2000 mode. If the mode is not changed to 2000-mode, the DP5000 phone will not
work and the display will be blank. Also see CIX Installation and Maintenance
Manual for additional information.
In 2000-mode:
• Only 16 characters by two lines display on the LCD.
• LCD Programmable Feature Button does not work
• Spdial button does not work

Step 1: Turn DKT2000 Mode On/Off

Important!
1. On the DKT3x00 telephone, press
2. Press
3. Press
4. Press
5. Lift the handset to exit programming mode. Wait a few seconds for the telephone
to reset itself.
Step 2: Connect Cordless Telephone to DP5000-series
Telephone
The cordless telephone (base station) will connect to the digital station port and then
in turn the DP5000 phone will connect to the cordless base station.
104
Change the mode on DP5000-series telephone before connecting a
DKT2204-CT or DKT2304-CT.
#
.
FB7
. LED On = 2000 telephone. LED Off = 5000-series telephone.
Hold
.
3 6 9 Hold
+ + + (simultaneously).
Strata CIX DP5000-series Telephone UG 10/10