Display Trill Interface - HP 6125XLG Command Reference Manual

Field
CSNP received
T1 expiration number

display trill interface

Use display trill interface to display TRILL information about an interface.
Syntax
display trill interface [ interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type interface-number: Specifies an interface by its type and number. If no interface is specified,
the command displays TRILL information about all interfaces.
Examples
# Display TRILL information about all interfaces.
<Sysname> display trill interface
Interface: FortyGigE1/1/1
Protocol state: UP
Nickname: 0xfa1b
MTU: 1470
DRB: Yes
Link type: Access
CSNP timer: 10s
Hello timer: 10s
Hello multiplier: 3
LSP timer: 10ms
LSP transmit-throttle count: 5
Cost: 2000
AVF inhibited timer: 30s
Priority: 64
Active AVF:
1-3, 5, 58
Inhibited AVF: None
Description
CSNP received flag bit:
•
Y—Set.
•
N—Not set.
Number of T1 timer expirations. The maximum value of the field is 10.
5