Field Description - HP 6125XLG Command Reference Manual

lsp-id lsp-id: Displays information about an LSP specified by its ID. The lsp-id argument is in the format of
SYSID.Pseudonode ID-fragment num, where SYSID is the SystemID of the originating node or
pseudo-node and fragment num is the fragment number of the LSP. If no LSP is specified, the command
displays information about all LSPs.
verbose: Displays detailed information. If this keyword is not specified, the command displays brief LSDB
information.
Examples
# Display brief information about the TRILL LSDB.
<Sysname> display trill lsdb
Flags: * - Self LSP
LSP ID
---------------------------------------------------------------------------
00a0.fc00.5806.00-00*
# Display detailed information about the TRILL LSDB.
<Sysname> display trill lsdb verbose
LSP ID: 00a0.fc00.5806.00-00*
Sequence number: 0x00000005
Checksum: 0xd315
Holdtime: 1145s
Length: 78
Overload: 0
Source: 00a0.fc00.5806.00
TRILL version: 0x00
Nickname:
Nickname: 0xfa1b
Priority: 64
Tree-root priority: 32768
Trees:
Compute trees number: 1
Max compute trees number: 15
Used trees number: 1
Tree identifiers:
0x899b
Trees used identifiers:
0x899b
Interested VLANs:
Start: 4, End: 4, M4: 0, M6: 0
Start: 5, End: 6, M4: 1, M6: 0
Neighbor:
ID: 00e0.fc58.123a.01, Cost: 2000
Group address:
VLAN ID: 2
Group MAC address: 0100-5e01-0101
Table 6 Command output
Field
LSP ID
Seq num Checksum
0x00000005 0xd315
Description
LSP ID. An asterisk (*) after an ID indicates that the LSP is locally originated.
7
Holdtime Length
361 78
Overload
0