display trill mfib ingress
Use display trill mfib ingress to display the information about ingress entries in the TRILL MFIB.
Syntax
display trill mfib ingress [ vlan vlan-id [ local-entry | remote-entry ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vlan vsan-id: Displays the information in the VLAN specified by its VLAN ID. The vlan-id argument is in
the range of 1 to 4094. If no VLAN is specified, the command displays information about all VLANs.
local-entry: Displays information about local ingress entries. The frames sent out of the ports in the local
ingress entries do not need the TRILL encapsulation.
remote-entry: Displays information about remote ingress entries. The frames sent out of the ports in the
remote ingress entries need the TRILL encapsulation.
Usage guidelines
If neither local-entry or remote-entry is specified, this command displays information about local and
remote ingress entries.
Examples
# Display all ingress entries in the TRILL MFIB.
<Sysname> display trill mfib ingress
======================================================================
Ingress type: Local entry
VLAN ID: 1
Ports:
FGE1/1/1
======================================================================
Ingress type: Remote entry
VLAN ID: 1
RootNickName: 0x5092
Ports:
FGE1/1/2
Table 7 Command output
Field
Ingress type
VLAN ID
Description
Type of ingress entries:
•
Local entry.
•
Remote entry.
VLAN ID of the entry.
9