Using Named Source-Port Filters - HP ProCurve Switch 6120G/XG Manual

Accounting Workstation 1
Accounting Workstation 2
Figure 9-4. Network Configuration for Named Source-Port Filters Example

Using Named Source-Port Filters

A company wants to manage traffic to the Internet and its accounting server
on a 26-port switch. Their network is pictured in Figure 9-4. Switch port 1
connects to a router that provides connectivity to a WAN and the Internet.
Switch port 7 connects to the accounting server. Two workstations in
accounting are connected to switch ports 10 and 11.
Network Design
1. Accounting Workstations may only send traffic to the Accounting Server.
2. No Internet traffic may be sent to the Accounting Server or Workstations.
3 All other switch ports may only send traffic to Port 1.
Defining and Configuring Example Named Source-Port Filters. While
named source-port filters may be defined and configured in two steps, this is
not necessary. Here we define and configure each of the named source-port
filters for our example network in a single step.
Port 1
Port 10
Port 11
Port 7
Traffic/Security Filters and Monitors
Filter Types and Operation
Router to the
Internet
Accounting Server 1
9-9