Show Commands For Web Authentication - HP ProCurve Switch 6120G/XG Manual

Web and MAC Authentication
Configuring Web Authentication
3-28

Show Commands for Web Authentication

Command
show port-access web-based [port-list]
show port-access web-based clients [port-list]
show port-access web-based clients <port-list> detailed
show port-access web-based config [port-list]
show port-access web-based config <port-list> detailed
show port-access web-based config [port-list] auth-server
show port-access web-based config [port-list] web-server
Syntax: show port-access web-based [port-list]
Displays the status of all ports or specified ports that are
enabled for Web authentication. The information displayed
for each port includes:
• Number of authorized and unauthorized clients
• VLAN ID number of the untagged VLAN used. If the switch
supports MAC-based (untagged) VLANs, MACbased is
displayed to show that multiple untagged VLANs are
configured for authentication sessions.
• If tagged VLANs (statically configured or RADIUS-
assigned) are used (Yes or No)
• If client-specific per-port CoS (Class of Service) values are
configured (Yes or No) or the numerical value of the CoS
(802.1p priority) applied to all inbound traffic. For client-
specific per-port CoS values, enter the show port-access
web-based clients detailed command.
• If per-port rate-limiting for inbound traffic is applied (Yes
or No) or the percentage value of the port's available
bandwidth applied as a rate-limit value.
Information on ports not enabled for Web Authentication is
not displayed.
Page
3-28
3-29
3-30
3-31
3-32
3-33
3-33