Live Video Setting; Live Video Setting; Setup - Samsung SmartCam SNH-1010N User Manual

Live Video Setting

Setup

5
6
No.
Specify whether to trigger the alarm or not, and specify the sensitivity.
1
Event Alarm The higher the sensitivity is, the subtler motion/sound events will be
detected.
This will prevent possible screen distortion due to a mismatch between
2
Flickerless
the vertical sync frequency and the blinking frequency of the lighting.
Set the IR lighting.
If you set it to <Auto>, the IR flash will stay active for 2 minutes before
turning off in a low contrast scene.
In order to reactivate the IR flash, access Video Live, or press the
3
Day/Night
IR-Flash button at the bottom of the live screen. The IR flash will be
active for 2 more minutes.
If you set it to <Color>, the camera will not switch to the Day/Night
mode.
1
2
3
4
Description
No.
Adjust the volume of the built-in microphone and speaker of the
camera as appropriate.
4
Audio
Note that the Two-way audio transfer function is available only
with the smart phone application.
You can configure the camera-related settings.
• Flip: You can flip over the video image.
: Disable the screen rotation.
5
Camera : Horizontally mirrors the video image against the vertical axis.
: Vertically flips over the video image against the horizontal axis.
: Rotate the screen by 180°
• Brightness: You can adjust the brightness of the screen image.
You can activate the motion and audio detection at a desired time.
Activation
6
• Always: It will work at all times.
Time
• Scheduled: You can select the time of activation.
n
If you display more than one live video with the Web browser, they can be
`
overlapped in some portion. It is recommended to use one browser at one time.
If camera is capturing a close object, the video analysis capability may degrade.
`
In the following cases, the video analysis function may not produce a proper
result on the default event and motion detections.
- The object color or brightness is similar to the background.
- Multiple movements continue occurring at random due to a scene change or other reasons.
- A fixed object continues moving in the same position.
- An object hides other objects behind.
- Two or more objects overlap or one object divides in multiple portions.
- Too fast object (for a proper detection, one object should be found overlapping
between contiguous frames).
- Reflection / blur / shadow due to a strong light such as direct sunlight, illumination, or headlamp.
- In severe snow, rain, wind or in dawn / dusk.
- A moving object comes close to the camera.
Description
2
03