SPECIFY SERVICE INSTRUCTIONS AND WARRANTY TERMS FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Instructions & Warranty • When using the product for children’s care, be careful to keep the product out of children’s reach. • The product partially contains component which might cause respiration difficulty. The manufacturer is not responsible for any loss or radio/TV interference caused by Accessories and small parts of the product should be stored keeping out of children’s unauthorized modification of the product.
Features • dedicated wi-Fi product - The camera is registered through the Wi-Fi connection. • Easy to install - The Wi-Fi Direct button allows easy connection to a wireless router. - Simply visit the home page (www.samsungsmartcam.com) and download and install the program without a separate installer program.
What’s Included Check for components when opening the product package. Camera Power adapter and cable Quick Start Guide Warranty Card GPL Lisence Tapping screw Plastic anchor Bracket Template Bracket lever Keep the packing container. You will need the serial number later to register the camera. 6 ·...
Part names and functions luminance Sensor power Connection Button Detects light levels where the camera is placed. It connects with a power adapter. Night vision mode changes according to detection result. Camera lens Micro card insertion hole Built-in IR lEds for night vision Built-in Mic power/wi-Fi status lEd Speakers...
power Supply ❖ lEd status LED indicator shows operational status with colors. Plug-in the camera power adapter to the wall outlet and connect the camera as Refer to table below for detailed meaning of the LED indicator. shown. Color Status Make sure to use the provided power adaptor.
Installation precautions Install the camera in a place where the Wi-Fi signal can be reached and & without interference. nStallation Keep it away from humidity such as around the humidifier. Keep it away from direct sunlight, strong light or dust; install it in a place with etwork onneCtion clear view.
If you are installing on a wood wall, leave 3mm of Leave 3mm of space between the wall's surface and space between the wall's surface and the mark on the the mark on the screw hole when fixing the screw. screw hole when fixing the screw.
Connection using the wi-Fi direct function Network Connection and Settings What is Wi-Fi Direct? precautions Using Wi-Fi Direct, you can easily connect your camera to a router without a cable. When the power is connected, the power status LED lights up in red and • The wireless network access may fail, depending on the communications starts blinking when boot-up is complete.
Registration This product allows camera registration via a smartphone only. Please refer to the mobile guide for a detailed description of camera registration. web browser requirements Windows onitorinG Windows 7 or higher is supported Mac OSX 10.10 (Yosemite) or higher is supported - Internet Explorer 9 or higher (The 64-bit is not supported.)
❖ plug in installation Click <Install> to begin the installation. You can only see the camera image after installing a plug-in. If you login or click <Starting SmartCam> in a PC where the plug in is not installed, the installation message window will pop up. When you install the plug in, the web browser will be terminated and you need to launch it again.
For Mac Enter MAC PC password and click <Install Software>. Click <Continue>. Installation has completed. Click <Install>. 14 · English...
Enter the requested information, and click <Sign Up>. Live Video Select a camera from the camera list at the upper left hand of the screen. • ID : Using alphabetical characters and numbers, make a combination The gray icon indicates the camera is inactive so you cannot monitor it right now. using 8 to 14 letters.
Monitoring options Item Description If Night Vision is set <ON>, it will automatically switch to black and white mode in the dark condition and then the IR lamp will Night Vision automatically operate. If Night Vision is set <OFF>, it does not switch to night vision mode and it will operate in color mode.
❖ wireless network Speed Item Description Recommended Adds/Adjusts the preset and sets the home position. Profile Name Resolution Frame rate Preset setup bandwidth The preset name should be up to 12 alphanumeric characters. Low Speed Network 10 fps 0.7Mbps Automatically tracks an object moving on the screen. Mid Speed Network HD(720P) 15 fps...
❖ preset setup ❖ privacy Mode Setup Click the Privacy Mode [ ] icon. When you click the [ ] icon while monitoring a live video, privacy mode will Click the < > icon. be enabled. Click the Move Screen arrow key and adjust the camera in the intended When privacy mode is enabled, the screen will be turned off and all functions direction to move to a desired screen.
Item Description Setup Serial number You can confirm the serial number. Click the <Modify>, you can change the Camera password. Basic Info Camera password Enter the current camera password, and type a new Camera password. Camera Name Click the <Modify>, you can change the camera name. You can check the current version and the latest version of your Firmware Version camera S/W.
❖ Firmware update network If the currently used S/W is not of the latest version, update it. If you are using the latest version, then the firmware will not be activated. Click <Firmware>. Click the < > icon to update the firmware. When the firmware update is finished, the camera will reboot.
time Item Description You will see a list of APs (Access Point) available. Select a desired one AP (Access Point) list from the list of APs (Access Point). You can access the network by entering the password set for the AP (Access Point) wireless router.
The time will synchronize with the NTP(Network Time Protocol) server automatically. Sd card For this, Internet connection is required. You need to set the timezone correctly to obtain the exact time setting. The time displayed without Internet connection may not be accurate. When an event occurs, it is saved in an SD card.
Turn off the camera power or set it to <Off> before removing the micro SD card. If you Event Alarm fail to do this, the data in the micro SD camera may be damaged. Please note that the content of a micro SD card used for other purposes may be deleted when it is mounted in the camera.
Playback Information You can play the video recorded in your SD card. Item Description Type Set the type of recording to search in the search period. Date Set the search date for the data saved in your SD card. Play/pause Play and pause video.
My account Support You can download the WiseNet SmartCam+ mobile app and user guide. If you want to change the member information, click on <Account>. Select the item (password, or email address) and enter your information.
Specifications Specifications Item Description Linux ppendix Resolution 1920x1080, 1280x720, 640x360 Max. Framerate 1920x1080 30FPS Video Compression Format H.264 Streaming Capability Multiple Streaming (Up to 4 Profiles) Specifications Angular Field of View (D/V/H) 96.1° / 43.4° / 80.9° Low Light Performance 0.3Lux(Color), 0Lux(Black/White) Specifications Product Appearance (Camera)
Item Description Item Description 4x(Mobile) Color Black (dark gray) Digital Zoom 10x(web) Dimension (ØxH) 85 x 84 mm Flip / Mirror Support Weight 155g Motion Detection Support Audio Detection Support Audio I/O Built-in microphone and speaker Audio Compression Format G.711 u-law Audio Communication 2-Way Audio (Built-in Microphone &...
Problem Action Troubleshooting The video from the - The video from the camera can be delayed according to a network delay. camera is temporarily Please check if the camera is installed in a place of proper wireless Internet lost. communications. If you encounter a problem with your system, see the table below to solve the problem as quickly and easily as possible.
Hanwha Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products. The Eco mark represents Hanwha Techwin's devotion to creating environmentally friendly products, and indicates that the product satisfies the EU RoHS Directive. Correct Disposal of This Product (Waste Electrical &...
Head Office 6, Pangyo-ro 319 beon-gil, Bundang-gu, Seongnam-si, Gyeonggi-do, 463-400 Rep. of KOREA Tel : +82.70.7147.8753 Fax : +82.31.8018.3740 www.wisenetlife.com Hanwha Techwin America 500 Frank W. Burr Blvd. Suite 43 Teaneck, NJ 07666 Tel +1.877.349.3149 www.wisenetlife.com Hanwha Techwin Europe Heriot House, Heriot Road, Chertsey, Surrey, KT16 9DT, United Kingdom Tel#1 00800.801.08022 Tel#2 +31.77.326.1580 www.wisenetlife.com...