Samsung SmartCam SNH-1010N User Manual page 21

Smartcam
Hide thumbs Also See for SmartCam SNH-1010N:
Table of Contents

Advertisement

<YouTube> Notification
When enabled, you can record up to 30 seconds of video to your private YouTube
account.
1. Select Enable.
2. Enter your YouTube user ID and password.
3. Select public or private folder to save. By default, it's set to private folder.
4. Click Apply.
n
You can check the recorded video at the YouTube homepage "Video Manager"
`
"Uploaded".
Note that depending on the policies of YouTube, the video may not be uploaded.
`
If setting to "public", the video may be exposed to the public.
`
`
It is advisable to create and use one YouTube account for each camera.
Even when you have set the YouTube alarm, the video will not be transferred if
`
the event alarm is not set to Enabled (see page 23).
If a continuous motion is detected or the audio alarm occurs, the camera can
`
recognize the next event only after the uploading to YouTube is completed.
(In other words, it does not recognize any event until the YouTube upload is
finished.)
<Picasa> Notification
When enabled, camera will send a picture of the event to your Picasa account.
1. Enter your Picasa user ID and password.
2. Select either public or private folder to save. By default, it's set to private folder.
3. Click Apply.
n
If you have set the private setting of the video image, no image will be found in portal sites.
`
Refer to the policy of Picasa for the maximum number of uploaded images.
`
YouTube and Picasa must be enabled to receive notifications.
`
<My Friends> Notification
When enabled, camera will send event notifications to listed user IDs.
Notifications can be viewed in Smartcam App or Google Talk.
- If this is set to <Enabled>, the video and image link recorded in YouTube and Picasa
will be transferred to the listed friends in real time in the event of an alarm.
- The video/image alarm will be transferred only if you have set the YouTube and
Picasa enabled. Otherwise, no alarm will be triggered.
- You will have no video displayed if you don't have any YouTube ID and access a private content.
- Even when you access the YouTube site, no video will be played automatically.
Be sure to click the Play icon to play a video.
If you fail to play the video, log into the YouTube site and install Flash Player and try again.
- The Friend list will have user IDs registered at the Web site (www.
samsungsmartcam.com). When an alarm occurs, the PUSH alarm will be notified to
the respective smart phones via the Web site.
- If you want to receive the notification with Google Talk, follow the instructions below
to configure the Google Talk settings.
1. xxxxxxxx@xmpp.samsungsmartcam
2. xxxxxxxx@xmpp.samsungsmartcam
03
21

Advertisement

Table of Contents
loading

Table of Contents