BrightVIEW User Manual SEW-3057W.indd 2016-12-23 11:48:39...
The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for BrightVIEW replacement of the obsolete outlet. User Manual Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
SPECIFY SERVICE INSTRUCTIONS AND WARRANTY • NEVER use the transmitter or monitor near water, including near a bathtub, sink, laundry tub, wet basement, etc. TERMS • This product is intended for indoor use only. FCC Caution : • This product is not intended for use as a medical monitor and its use should not replace adult supervision.
’ ncluded Package Contents The system comes with the following components: Wireless camera Wireless monitor User Manual & Warranty Card Camera Adapter Monitor Adapter Plastic anchor (1EA) & Screw (1EA) Wireless wrist band Wrist band Adapter Sensor Check your package to confirm that you have received the complete system, including all components shown above. English ·...
Operating the System ettInG tarted The basic operation is as follows: Functional Description Camera and Monitor pairing Powering your monitor The units already come paired for your convenience. This button is used to add an additional camera. User can select camera number PAIR After opening the box, fully charge the monitor before use.
Voice activated (VOX) Sound level Select to monitor significant sound with reduced ambient noise. The louder the sound around the camera, the more LEDs turn on. The screen goes off in “VOX” mode if there is no significant sound louder than a certain level about 30 seconds. Meanwhile, the monitor screen turns on as soon as detecting sound around the camera.
e Remote View IeWInG Isplay Remote access with free Apps for smartphone. f SD card status Indicator Description No SD card Unsupport SD card SD card g x1/x1.5/x2 Zoom mode How to use the indicator Indicates that current screen is Zoomed in. Press [ ] icon on the monitor to zoom back out.
Humidity Display Indicates the percent of air humidity according to the sensor. Humidity Alert range : below 45% ‐ above 65% Temperature Display Indicates the temperature value according to the sensor. No Signal Warnings The "Out of Range" message means the monitor cannot access the camera. Please reposition the camera, or check the camera power.
b -1 Photo Diary Menu Operation If you choose date, it will show the baby's photo. b -2 Pair / Unpair Camera How to use the function tools The LCD suppor up to 4 cameras, you can choose the camera to pair with the monitor or unpair.
Settings How to use the setup icon e Brightness Settings Adjusts the brightness of the image shown. If you are using multiple camera, Press the [ ] icon to save the changes and return to previous menus. you can adjust the brightness of each individual camera.. To return to the Live screen, press the [ ] icon.
VerVIeW Getting to know your Monitoring system Wireless Monitor After opening the box, fully charge the monitor before use. After initial charge, recharge as needed. Front Controls Monitor Antenna Receives and sends signals from or to the camera. Microphone Transmits audio to the camera when [ ] icon is pressed down and receives sound for the area near the camera.
Back Controls Mirco SD Power On/Off SD card external storage, up to 32GB supported Turn on/off the wireless monitor. Kick Stand Use to hold the monitor onto a table. DC 5V Power Input Connect the included AC power adapter to power and/or Speaker charge the monitor battery.
Wireless Camera Front & Back Controls IR Sensor Night Light Button Infrared LED’s sensor you can turn the night light on or off by touch the button or remotely control. Microphone Receives sounds for the area near the camera, and Camera Antenna transmits sound from the camera to the monitor.
Wireless wrist band Wireless Camera The button of the Wireless wrist band function: Before you install the camera, carefully plan where and how it will be positioned, and 1) press the button when the wireless wrist band black srceen, it will shin last for 6 seconds. where you will route the cable that connects the camera to the power adapter.
eMote 1. Go to App store to download and install "Baby View" into your Mobile phone and install .(picture1) 2. Power the camera. 3. Press the "reset" button on the camera. 4. Press "setting button" of your cell-phone to search the camera Wi-Fi, touch the camera Wi-Fi to connect.
picture13 English · 17 SEW-3057W.indd 2016-12-23 11:49:30...
Item Details ppendIx Lens EFL=3.95mm, F=2.2 Specifications Viewing Angle (Diagonal) 55 degree IR LED Type/ Night Vision IR LED – 940nm /5m Wireless Camera Lullabies 4 songs (Monitor Remote On / Off) Image Sensor Type 1/4” Color CMOS Image Sensor Night Light Yes (Manual &...
Item Details Item Details Feed Timer Alert Yes (beep sound) Display Digital watch / Battery check / connection check sensor temperature alert range Control part push toggle 0°C ~ 40°C (User range) Transmission range 10 meters Humidity range : below 45% ， above 65% Sensor Alert range (can’t change by users) Weight / Strip length...
Problem Solution Your BrightVIEW is emitting an high This sound is normal feedback which occurs if the monitor and camera are too pitched noise/ close together. Move them further apart. feedback. Low batteries will cause the supply current to become unstable and will affect the quality of the video/audio.
Screw holes for the Camera installation TEMPLATE This template is used to install the camera on the wall. CAMERA FRONT SEW-3057W.indd 2016-12-23 11:49:31...
Head Office 86 Cheonggyecheon-ro Jung-gu Seoul 04541 Korea Tel +82.2.729.5277, 5254 Fax +82.2.729.5489 www.hanwha-security.com Hanwha Techwin America 500 Frank W. Burr Blvd. Suite 43 Teaneck, NJ 07666 Toll Free +1.877.213.1222 Direct +1.201.325.6920 Fax +1.201.373.0124 Hanwha Techwin Europe Heriot House, Heriot Road, Chertsey, Surrey, KT16 9DT, United Kingdom Tel +44.1932.57.8100 Fax +44.1932.57.8101 SEW-3057W.indd 2016-12-23...