Ii-3. Wps Setup; Ii-4. Connecting To Your Hp-5101Wn - Edimax HP-5202Wn User Manual

II-3. WPS Setup
If your wireless router/access point supports WPS (Wi-Fi Protected Setup)
then you can use this method to set up your HP-5101Wn's Wi-Fi network.
WPS is an alternative to
(including SSID) will be the same as your existing router/access point.
1.
Press the WPS button (often the WPS/Reset button) on your router/access
point to activate WPS.
Please check the instructions for your wireless router/access
point for how long you need to hold down its WPS button to
activate WPS. Take care not to hold the WPS button for too
long – this may result in inadvertently resetting the extender
or router/access point.
2.
Within two minutes, press and hold the WPS button for 2–5 seconds on
the HP-5101Wn to activate its WPS. The HP-5101Wn's WPS LED should
flash to indicate a WPS connection is in progress.
3.
The devices will establish a connection. The HP-5101Wn's WPS LED should
display on to indicate a successful connection. You can now connect to the
HP-5101Wn's wireless network with a Wi-Fi device, as described in
Connecting to your HP-5101Wn.
II-2. iQ Setup. The HP-5101Wn's Wi-Fi settings
15
II-4.