Ii-3. Wps Setup - Edimax HP-5102Wn User Manual

II-3. WPS Setup
If your wireless device supports WPS (Wi-Fi Protected Setup) then you can use
this method to connect to the HP-5102Wn's Wi-Fi after you have established
a Powerline connection.
1.
Press the WPS button on the HP-5102Wn for less than 2 seconds to
activate WPS. The HP-5102Wn's Wi-Fi LED will display on to indicate that
WPS is active.
2.
Within two minutes, press the WPS button on your wireless device to
activate WPS. The devices will establish a connection.
Note:
wireless device for how long you need to hold
down its WPS button to activate WPS.
Please check the instructions for your
9