Wps Button (Push-Button); Wps Setup - Pbc (Push-Button Configuration) - Edimax EW-7711UAn / EW-7711UTn / EW-7711UMn / EW-7711USn User Manual

2-7-1 WPS Button (Push-Button)

With WPS button, it is easy to connect with a secure wireless network. If the wireless
AP/Router supports WPS feature, just press the WPS button of the wireless AP/Router
first. After press the WPS button on the wireless adaptor. The wireless adaptor will scan
and connect with the AP/Router automatically, no need any further setup process and
security setting ...etc. in the adaptor utility.

2-7-2 WPS Setup - PBC (Push-Button Configuration)

1. Right-click the Edimax configuration utility icon located at lower-right corner of computer
desktop and then click 'Launch Config Utility'.
2. Click 'WPS' menu, and the following settings will appear.
3. Set 'Config Mode' to 'Enrollee', and then push the 'WPS' button on your wireless access
point (the button used to activate WPS standby mode may have another name), or use
other way to start WPS PBC standby mode as the instruction given by your wireless
access point's user manual.
45