Table of Contents
Advertisement
5. Install the replacement Mini-Card:
a. Insert the Mini-Card connector into the system board connector at a 45-degree angle, and then press the other end of the Mini-Card down into
the securing tabs until the card clicks into place.
NOTICE:
To avoid damage to the Mini-Card, never place cables under the card.
b. Connect the two antenna cables to the Mini-Card (black cable to the connector labeled "AUX" and the white cable to the connector labeled
"MAIN").
1 system board connector
2 antenna cables (2)
Back to Contents Page
3 antenna cable connectors (2)
Hide quick links:
Advertisement
Table of Contents
