Replacing The Palm Rest - Dell Inspiron 6400 Service Manual

8. Disconnect the touch pad connector and the standby switch connector from the system board.
1 standby switch connector
2 touch pad connector
9. Lift the palm rest and remove it from the computer.
Replacing the Palm Rest
1. Align the palm rest with the bottom plastics and gently snap it into place.
2. Reconnect the touch-pad connector and the standby switch connector to the system board.
3. Tighten the palm -rest captive screw.
4. Turn the computer upside-down, and replace the eleven M2.5 x 8-mm screws on the bottom of the computer.
5. Replace the display assembly (see
6. Replace the keyboard (see Keyboard).
7. Replace the hinge cover (see
Back to Contents Page
Replacing the Display Assembly).
Replacing the Hinge Cover).