Table of Contents
Advertisement
Back to Contents Page
Palm Rest
Dell™ Inspiron™ 6400/E1505 Service Manual
Removing the Palm Rest
Replacing the Palm Rest
Removing the Palm Rest
CAUTION:
Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE:
To help prevent damage to the system board, remove the main battery (see
computer.
1. Follow the instructions in
Before Working Inside Your
2. Remove the optical drive (see
3. Remove the hinge cover (see
4. Remove the keyboard (see Keyboard).
5. Remove the display assembly (see
6. Remove the eleven remaining 2.5 x 8-mm screws from the bottom of the computer.
NOTE:
The screw locations may vary slightly from the image shown below.
1
2.5 x 8-mm screws (11)
7. Turn the computer top-side up and loosen the palm -rest captive screw.
Computer.
Optical
Drive).
Removing the Hinge
Cover).
Removing the Display
Assembly).
Before Working Inside Your
Computer) before working inside the
Hide quick links:
Advertisement
Table of Contents
