Ricoh Aficio SP 204SN User Manual page 173

Message
Data in the memory was deleted
Memory Data Lost
due to a memory fault.
The timeout period set in [I/O
Timeout] expires when printing
Cancel Printing
is frequently interrupted by data
from other ports, or when the
I/O Timeout
print job is large and takes time
for processing.
Cannot Print
The data is too large or
complex to print.
Memory Overflow
Size Mismatch:
The specified paper size of the
Tray1
file does not match that of the
paper loaded in Tray 1.
Press Start or Stop
The specified paper size of the
Size
file does not match that of the
Mismatch:Bypass
paper loaded in the bypass
Press Start or Stop
tray.
Type Mismatch:
The specified paper type of the
Tray1
file does not match that of the
paper loaded in Tray 1.
Press Start or Stop
The USB cable or Ethernet cable
Scan Disconnected was disconnected while
scanning from a computer.
The connection with the FTP,
Cannot Connect
SMTP, POP3, SMB, SNTP, or
DNS server was lost while
#### Server
sending or receiving data.
Causes
The machine prints Power Failure Report
and recovers from the error automatically.
Set [I/O Timeout] to a larger value than
the current setting. For details, see
page 125 "Printer Features Settings".
Select [600 x 600dpi] in [Resolution:] to
reduce the size of data. For details, see the
Printer Driver Help.
Press the [Start] key to begin printing, or
press the [Stop/Clear] key to cancel the
job.
Press the [Start] key to begin printing, or
press the [Stop/Clear] key to cancel the
job.
Press the [Start] key to begin printing, or
press the [Stop/Clear] key to cancel the
job.
Reconnect the USB cable or Ethernet cable
properly, and then try the operation again.
If the problem involves the FTP/SMB
server, check the [Edit Network Scan
Destination] setting in Smart Organizing
Monitor.
If the problem involves the SMTP/POP3/
SNTP server, check the [Server
Properties...] setting in Smart Organizing
Monitor.
If the problem involves the DNS server,
check its configuration using Web Image
Monitor.
Error and Status Indicate on the Control Panel
Solutions
171