Ricoh Aficio SP 204SN User Manual page 137

Item
Domain Name Specify whether to use the domain name obtained from the DHCP server, or the
domain name set for the device.
• "Auto-Obtain (DHCP)" selected
• "Specify" selected
IPv4 Address Enter the IPv4 address of the network interface board.
At DHCP operation, the address obtained from the DHCP server is used.
Subnet Mask Enter the sub-net mask of the network interface board. The sub-net mask is a
part of the IP address used as a network address.
When using DHCP, the sub-net mask obtained from the DHCP server is used.
DDNS Select whether DDNS (Dynamic DNS) name resolution for the network interface
board is active or inactive.
When active, the DNS database is immediately updated.
Details
Item
Default Gateway Enter the default gateway address.
Address
The default gateway address is the IP address of the host or router used as the
gateway when communicating (printing or exchanging information) with a
computer on another network.
When using DHCP, the default gateway address obtained from the DHCP
server is used. If the address cannot be obtained from the DHCP server, the
default gateway address set for the device is used.
DNS Server Select whether to use the DNS server obtained from the DHCP server, or the
DNS server set for the device.
LPR Select to enable network printing using LPR/LPD.
RAW Select to enable network raw printing.
IPP Select to enable network printing using Internet Print Protocol.
When using DHCP, the domain name obtained from the DHCP server is
used. If the domain name cannot be obtained from the DHCP server, the
domain name set for the device is used.
The domain name set for the device is used. Enter the domain name, using
up to 63 characters. Spaces cannot be used.
Using Web Image Monitor
Description
Description
135