Lcd Screen; Manual Settings - La Crosse Technology WS-9049 Instruction Manual


Stop the alarm during alarm ringing
 Stop snooze mode
ALM/DATE key

Press and hold key for 3 seconds to enter the alarm set mode

Activate/de-activate the alarm time

Silence the alarm

Cancel snooze mode

Display date
IN key

Press to toggle between MAX/MIN and current indoor
temperature/humidity data
 Press to set the alarm hour (inside alarm setting mode)

Decrease relative pressure value (within manual set mode)

Silence the alarm

Cancel snooze mode
17
Time reception icon Moon phase
(for WWVB time) icon
Time
Low battery
indicator
Indoor
temperature
in °F/°C
Weather
tendency
indicator
Weather
forecast
icon
Outdoor
temperature in
°F/°C
Remote transmitter
Outdoor data
number (if more than 1
signal reception
transmitter is used)
indicator*
19
Alarm icon
Calendar
or alarm
time
Indoor relative
humidity in
RH%
Comfort
indicator icon
Relative air
pressure history
Relative air
pressure in
hPa / inHg
Outdoor
relative
humidity in
RH%
OUT/+ key

Press briefly to toggle between MAX/MIN and current outdoor
temperature/humidity data

Increase, change, toggle all values in manual set mode

Press to set the alarm minute (inside alarm setting mode)

Silence the alarm

Cancel snooze mode
SNOOZE/CH key

Activate snooze function

Exit the manual and alarm set modes

Switch between display of channels (if more than 1 transmitter is
used)

LCD SCREEN

The LCD screen is split into 4 sections displaying the information for
time/calendar/alarm/moon phase, indoor data, weather forecast and
outdoor data.
18
* When the signal is successfully received by the Weather Station, the
outdoor transmission icon will be switched on. If not successful, the
icon will not be shown on LCD. You can then see whether the last
reception was successful (icon on) or not (icon off). A short blinking of the
icon indicates that signal reception is currently taking place.

MANUAL SETTINGS:

The following manual settings can be changed when pressing the SET
key:

LCD contrast setting

Time zone setting

DST ON/OFF setting

Time reception ON/OFF setting

12/24-hour format setting

Manual time setting

Calendar setting

°F/°C temperature setting

Air pressure setting (hPa / inHg)

Relative air pressure setting

Weather forecasting icon sensitivity setting
20