LCD SCREEN
When the signal from an outdoor transmitter is successfully received by the Weather Station, the
corresponding
The user can see whether the last reception was successful (
of the
icon shows that a reception is in process.
PROGRAM MENU
Press and hold the SET button for 3 seconds to enter the SET mode.
Note: The display will automatically return to Mode 1 display in 30 seconds if a button is not pressed.
While in SET mode, press the SET button to advance to the next SET mode item:
LCD contrast setting
Manual time setting
12/24 hour time display
Date setting
°F/°C temperature unit setting
Wind speed unit
Rainfall unit setting
LCD CONTRAST SET
M o d e l W S - 2 8 1 6 U - I T
icon will be switched on. (If not successful, the
The LCD contrast can be set within 8 levels; from "Lcd 1" to "Lcd 8" (default
setting is "Lcd 5"):
1. Press and hold the SET button for 3 seconds; the contrast level digit
will flash.
2. Press the ▲/DATE button or ▼/RAIN button to adjust the level of
contrast.
3. Press the SET button to confirm and to enter the MANUAL TIME SET.
w w w . l a c r o s s e t e c h n o l o g y . c o m / s u p p o r t
icon will not be shown on the LCD).
icon is on) or not (
Air pressure unit setting
Relative pressure reference value setting
Weather tendency threshold value
Storm warning threshold value
Alarm On / Off setting
Wind direction display type
Factory Reset or Internet Connection Reset
icon is off). Blinking
P a g e | 10