Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for La Crosse Technology WS-9023U
Summary of Contents for La Crosse Technology WS-9023U
- Page 1 WS-9023U 915 MHz Wireless Weather Station Instruction Manual...
-
Page 2: Table Of Contents
TABLE OF CONTENTS Introduction……………………………………………………………………………………..3 Inventory of Contents…………………………………………………………………………4 Quick Set Up……………………………………………………………………………………4 Detailed Set Up………………………………………………………………………………4-5 Battery Installation…………..………………………………………………………..4-5 12 or 24 Hour Time Display………..…………………………………………………..5 Time Setting………..……..…………………………………………………………….5 Features……………………………………………………………………………………….6-7 Minimum & Maximum Temperature and Humidity……………………..……………6 Resetting Minimum & Maximum Temperature and Humidity………..…………….6 Adding Additional Thermo-Hygro Sensors……………………………..…………….6 Viewing &... - Page 3 LA CROSSE TECHNOLOGY. INSTANT TRANSMISSION offers you an immediate update (every 4 seconds!) of all your outdoor data measured from the sensors: follow your climatic variations in real-time! 12 or 24 Hour...
-
Page 4: Inventory Of Contents
Wireless Thermo-hygro Sensor INVENTORY OF CONTENTS 1. Wireless Weather Station (Figure 1) 2. Wireless Thermo-Hygro Sensor (TX21U) and mounting bracket. (Figure 2) Mounting 3. 3 each, 1/2” Philips screws. Bracket 4. One strip of double sided adhesive tape. 5. Instruction Manual and Warranty Card. ADDITIONAL EQUIPMENT (not included) 1. - Page 5 indoor temperature and the time as 12:00 will be displayed. If they are not shown in LCD after 60 seconds, remove the batteries and wait for at least 60 seconds before reinserting them. Once the indoor data is displayed user may proceed to the next step.
-
Page 6: Or 24 Hour Time Display
MIN/MAX button for 5 seconds. C. ADDING ADDITIONAL REMOTE SENSORS (OPTIONAL) The WS-9023U is able to receive signals from 2 additional thermo-hygro sensors . The following are instructions for the set-up of thermo-hygro sensor units with the WS-... - Page 7 1. Remove all the batteries from the receiver and sensor(s) and wait 60 seconds. During these 60 seconds, press any button 20 times to discharge any excess power. 2. Insert the batteries to the first Thermo-hygro sensor. 3. Within 2 minutes of powering up the first sensor, insert the batteries to the Weather Station.
-
Page 8: Mounting
Wireless Weather Station down to lock the screw into place. TROUBLESHOOTING NOTE: For problems not solved, please contact La Crosse Technology via e-mail or phone, or visit our website, www.lacrossetechnology.com Problem: The LCD is faint Solution: Replace batteries Problem: No outdoor temperature is displayed. -
Page 9: Maintenance & Care Instructions
• Do not subject the units to unnecessary heat or cold by placing them in the oven or freezer. • Opening the casings invalidates the warranty. Do not try to repair the unit. Contact La Crosse Technology for repairs. SPECIFICATIONS Transmitting... -
Page 10: Warranty Information
Warranty service can only be performed by a La Crosse Technology, Ltd authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to La Crosse Technology, Ltd or La Crosse Technology, Ltd’s authorized service center. - Page 11 LA CROSSE TECHNOLOGY, LTD WILL NOT ASSUME LIABILITY FOR INCIDENTAL, CONSEQUENTIAL, PUNITIVE, OR OTHER SIMILAR DAMAGES ASSOCIATED WITH THE OPERATION OR MALFUNCTION OF THIS PRODUCT. THIS PRODUCT IS NOT TO BE USED FOR MEDICAL PURPOSES OR FOR PUBLIC INFORMATION. THIS PRODUCT IS NOT A TOY.