Table of Contents
Advertisement
Specifying the Place for an Insert
In the Page Insertion mode, you must specify where to place an insert by using Automatic Detection.
Automatic Detection
Put a sheet of paper of a different size from the originals at your desired places in the original set (for
convenience, let us call this paper the insert marker), load the original set onto the duplexing document
feeder and let the copier start the original count sequence.
<The copier automatically detects and sets the places for inserts.
Original Set
Insert Marker
Example:
2nd from top
NOTE
• This mode cannot be selected with Mixed. Orig. Detection.
• When using Page Insertion in combination with Separate Scan, make sure that the insert marker is
not placed at the end of one part of the document for Separate Scan.
Original Set
1
2
3
Copy Set
4
5
6
Insert Marker
7. Auxiliary Functions
p. 3-38
Copy Set
Insert
Insert
1149O048AA
Original Set
1
4
2
3
1166O285AA
OK
3-37
Insert Marker
5
6
Advertisement
Table of Contents
