Table of Contents
Advertisement
6-2
1. When This Type of Copy is Produced
When this type of copy is produced
Symptom
The image is too light.
The image is too dark.
The copy is blurry.
Possible Cause
The exposure level for the Auto
Exposure mode is set at
"Lighter."
1074O108
The exposure level for the
Manual Exposure mode is set at
"Lighter."
You have been making copies
from a photo or an original with
a large dark area.
The Toner Bottle has just been
replaced.
The message "Replenish Toner."
is shown on the Touch Panel.
The paper is damp.
The exposure level for the Auto
Exposure mode is set at
"Darker."
1074O109
The exposure level for the
Manual Exposure mode is set at
"Darker."
The Original Glass surface is
dirty.
The original is not held tightly
against the Original Glass.
The paper is damp.
1074O110
Action
Change the setting of "Auto
Exposure Level" of User's
Choice.
p. 4-6
Or, cancel the Auto Exposure
mode and select Manual
Exposure to adjust the exposure
level to obtain a darker image.
p. 3-32
Touch
as necessary to
Darker
obtain a darker image.
The copier needs more toner.
Replenish toner by using Toner
Replenisher of Utility Mode.
p. 4-16
The copier needs more toner.
Replenish toner by using Toner
Replenisher of Utility Mode.
p. 4-16
Replace the Toner Bottle.
p. 5-10
Change the paper.
p. 5-2
Change the setting of "Auto
Exposure Level" of User's
Choice.
p. 4-6
Or, cancel the Auto Exposure
mode and select Manual
Exposure to adjust the exposure
level to obtain a lighter image.
p. 3-32
Touch
as necessary to
Lighter
obtain a lighter image.
Wipe the Original Glass clean
with a soft dry cloth.
p. 7-8
Place the original in position so
that it is held tightly against the
Original Glass.
p. 2-20
Change the paper.
p. 5-2
p. 3-32
p. 3-32
Advertisement
Table of Contents
