Table of Contents
Advertisement
Staple
Hole Punch
Useful Tip
The copier has been factory-set to automatically select Non-Sort in the initial mode. Also, the copier
automatically switches between Sort and Non-Sort depending on the number of originals loaded in the
Document Feeder and the number of copies to be made. User's Choice can, however, be used to
change these default settings.
<Only when the Finisher or Mailbin Finisher is
mounted>
• This function is effective when making multiple
copies from multiple originals. Copies are sorted
or grouped into complete sets of the originals and
then stapled.
Touch
NOTE
Thick paper and OHP Transparencies cannot
be used for making copies in Staple mode.
1151O108AA
<Only when the Finisher or Mailbin Finisher is
mounted>
• Holes are punched in the copy sets or stacks for
filing. It can be combined with Non-Sort, Sort,
Group or Staple.
Touch
NOTE
Thick paper and OHP transparencies cannot be
used for making copies in Punch mode.
1149O399DA
p. 4-7
4. Selecting the Finishing
Staple
.
Hole Punch
.
3-17
Advertisement
Table of Contents
