Settings In User Management; Setting The Confirmation Beep And Alarm Beep - Hitachi DDC 35N Operator's Manual

4-14

5. Settings in User Management

Setting the Confirmation Beep and Alarm Beep

Confirmation Beep
The volume of the confirmation beep that can be
heard when a control panel key is pressed may be
adjusted in the range between 0 (zero) and 5
(high).
The initial setting is "3."
1 Press the Utility key.
User Management
2 Touch
Alarm Beep
The volume of the alarm beep that sounds when,
for example, a paper misfeed occurs may be
adjusted in the range between 0 (zero) and 5
(high).
The initial setting is "3."
3 Select the desired function.
For example, touch
1166O241DA
.
Touch the
4
volume to the desired level and then touch
1168P125CC
Confirmation Beep
or key to adjust the
Exit
.
.
1168P126CD
1168P127CB