Settings In Admin. Management; Admin. Management Mode; Setting Admin. Management - Hitachi DDC 35N Operator's Manual

4-18

6. Settings in Admin. Management

Admin. Management Mode

The Admin. Management mode is for the administrator of your copier. When Admin. Management is
selected, the message prompts you to enter the administrator number.
NOTES
• The administrator number is to be programmed by your Tech. Rep. Ask him/her for more details.
• The administrator of this copier should remember the administrator number.

Setting Admin. Management

Press the Utility key.
1
Touch Admin. Management
2
Enter the administrator number from the 10-
3
key Pad and touch
1166O241DA
.
1168P137CC
Enter .
1166O030AA
The Touch Panel now shows the detailed
4
functions that can be set under Admin.
Management.
1168P105CB