Loading The Originals - Hitachi DDC 35N Operator's Manual

Loading the Originals

Staple
Note the correct direction of the originals if the copies are to be stapled in Staple Mode.
Duplexing Document Feeder
Staple Position
Useful Tip
Refer to the instruction labels on the machine or the Document Feeder.
Hole Punch
Note the correct direction of the originals if the copies are to be punched using Hole Punch.
Panel
1168P097DA
1168P098DA
Note on Stapling
When copies are made using the stapling function, the stapled copy sets may not be neatly stacked on the
tray or may even fall off the tray unless certain conditions are met regarding the number of copies to be
stapled and the number of copy sets to be made. Use the following table as a guide when making copies.
No. of Copies Stapled
2 copies
3 to 5 copies
6 to 10 copies
11 to 20 copies
21 to 30 copies
31 to 40 copies
41 to 50 copies
1166O040AA
Duplexing Document Feeder
Punched Hole Position
1166O101DB
Punched Hole Position
1166O104DA
When Finisher is Mounted
200 sets
150 sets
100 sets
70 sets
53 sets
45 sets
40 sets
Original Glass
Staple Position
1166O037AB
Original Glass
Punched Hole Position
Punched Hole Position
1166O106DC
Copy Set Capacity
When Mailbin Finisher is Mounted
200 sets
150 sets
100 sets
50 sets
33 sets
25 sets
20 sets
3-21
4. Selecting the Finishing
1166O103DB