If the power cord is broken or insulated wires are exposed, be sure to
get them replaced. (Do not use the damaged cord.)
!
CAUTION
Never unplug or replug the printer while it is on.
When unplugging the printer, grasp the plug instead of the cord.
Be sure to switch off and unplug the printer before accessing its inte-
rior for cleaning or maintenance.
When the printer is not used over an extended period of time, switch
it off and unplug it.
Once a month, unplug the printer and check that:
the power cord is plugged firmly into a receptacle.
the power cord is not cracked or frayed.
the plug is not excessively heated, rusted, or bent.
the plug and receptacle are free of dust.
:
NOTE
If you notice any unusual conditions, contact your service
representative.
Safety Information A-7