Steel City 35600 User Manual page 21

CONNECTING SWITCH CORD
TO MOTOR CORD
WARNING
!
MAKE CERTAIN THAT THE SAW IS DISCONNECT-
ED FROM THE POWER SOURCE.
1. Place the switch cord (A) through hole (B) in front
of cabinet. SEE FIG. 13A.
Fig. 13A
A
Fig. 13B
2. Open motor cover, insert three prong switch cord
B
3. Pull slack in switch cord into the cabinet.
!
Make sure that the power cord inside of the cabinet is
properly routed and clear of the saw blade and any
pinch points for all blade height and blade angle
settings.
MOUNTING RAILS, FENCE
AND TABLE BOARD
The rails, fence assembly, power switch, and table
board can now be mounted to the saw. See Owner's
Manual for Fence Assembly Instructions which will
address the mounting of these parts.
21
(C) into three hole outlet (D) of the motor cord. SEE
FIG. 13B.
WARNING
C
D