Generalmusic 271221 Owner's Manual page 77

the keyboard, you will hear that the sample now finishes at an
earlier point.
At this stage you can also choose to "trim off" the surplus data
which still remains after the newly set end point. To do this, press
the CUT button, (F3).
LOOP ON / OFF
Setting this feature to on will activate a continuous loop between
the LOOP START and SAMPLE END points when a key is played.
TUNING BUTTON, (F1)
Pressing the TUNING button will assign an ordinary sound to the
keyboard. This sound is designed to be used as a reference pitch
when setting the PITCH and RATE parameters.
GAIN BUTTON, (F2)
This function will rewrite the sample data to increase or decrease
the overall gain. Pressing the gain button will display a window
where you can view an image of the sample.
Use the dial to select which level you want the gain to be changed
to, then press ENTER to start the rewriting process. Because
the gain function has to re-write all of the data in the sample file,
it can take quite a long time when working with larger samples.
Sample Mode 4•9