Effects Functions - Generalmusic 271221 Owner's Manual

PROEFX
This section is the most important and powerful of all three ef-
fects sections.
In addition to containing a variety of high quality stereo effects,
(Flanger, Chorus, Overdrive etc.), it also contains a number of
popular studio post processing functions, (3D, EQ, Loudness
Maximizer, Audio Exciter etc.).
It is also the only section which offers a WET/DRY mix parame-
ter in those effects where it is appropriate. It also has the ability
to be completely disabled and used as a direct stereo dry signal
control, (see SEND ).
The ProEFX section also contains two "post send" controls which
allow you to send the sound, after it has been processed by the
ProEFX section, to the Reverb, ( TO REVERB ) or to the MultiFX,
( TO MULTIFX ).

Effects functions

SEND (button F2): This function allows you to assign the amount
of each effect that you want to apply to the sound. For REVERB
and MULTIFX, simply select the amount of each effect that you
want - from 0 - 127.
The ProEFX section of the SEND menu operates slightly differ-
ently from the other two. Because both the Reverb and MultiFX
outputs are "100% wet", the amount of dry signal in the sound is
controlled by the ProEFX send level.
If you are using an effect from the ProEFX section then, in many
Sound mode 1•25