4•4 User Guide
3. Select the device from the options list and press ENTER.
4. Use the cursor controls to locate and highlight the sample file
you wish to load.
5. Press ENTER.
To load a sample via MIDI using Sample Dump Standard:
1. Connect two MIDI cables between the sending device and
the Equinox, (MIDI OUT to MIDI IN and MIDI IN to MIDI
OUT).
2. Prepare the sending device to send the sample, (but don't
start it yet).
3. Press LOAD, (F1).
4. Select MIDI SAMPLE REQ from the options list and press
ENTER.
5. Choose the number of the sample you want to load, (if you're
not sure, try 0 or 1).
6. Press ENTER.
Now you've loaded a single sample and you can see it at the top
of the SAMPLE LIST. This list can contain up to 16 samples at