METHOD 2: Catch Locator. Quite often, you will be listening to
the playback of the track when you suddenly notice an error which
needs to be fixed. When this happens, simply press the STOP
button once so that it flashes. The sequencer is now paused at
the point where you pressed STOP. It is now possible to view the
event list for the exact point where you paused the playback by
using the CATCH LOCATOR function. Here's how to do it:
1. Press STOP once at the desired point during playback.
2. Go to EDIT / EVENTS.
3. Press the corresponding track button whose events you
wish to edit, (you'll see the track name in the top left corner of
the display).
4. Press the LOC button, (F2).
5. Check that the CATCH LOCATOR function is selected and
press ENTER.
Remember that, if you pressed STOP after hearing an error in
the track, the problem section is probably a few events before
those currently being displayed.
Sequencer 11•31