Assigning Samples - Generalmusic 271221 Owner's Manual

the same time. These 16 samples can be mapped to different
regions of the keyboard and then saved as a single Equinox
waveform when you've finished.
If you want to load another sample at this time, move the cursor
down to the second line of the SAMPLE LIST, press LOAD, (F1)
and proceed as before.

ASSIGNING SAMPLES

Once you've loaded in the samples that you need, the only es-
sential step you need to take before you can save them is to
ASSIGN, (or "map"), your samples to a specific range of keys.
Press the ASSIGN button, (F3) to open the ASSIGN MENU.
Assigning a single sample
If you've only loaded a single sample then you'll probably just
want to assign it to the full range of keys. When you enter the
ASSIGN MENU, you will see the lowest and highest note range
displayed to the right of the sound name.
The default values are A0 to C8 - the full length of the keyboard.
To accept and confirm these settings, simply press the ENTER
button, then ESCAPE to return to the main SAMPLE TRANSLA-
TOR screen.
Sample Mode 4•5