Load - Generalmusic 271221 Owner's Manual

8•6 User Guide

Load

Loading data into the Equinox is a fairly simple procedure. It
uses the same "directory tree" structure that we've already seen
in the SAVE example.
When you first try to LOAD from any device, you will see the
familiar "root directory" at the top, (usually called "MS-DOS") and,
if they exist, a list of the blocks that the disk contains.
Loading an entire block is simple. Place the cursor over the block
name, press LOAD, (F3) and follow the prompts.
To load only a part of a block, press ENTER while the cursor is
over the block's name. This will expand the "directory tree" of the
block and allow you to specify what you want to load.
Keeping the cursor on the left side, you can load entire groups of
Sounds, Performances, Grooves, Songs etc. by pressing LOAD,
(F3) when the cursor is over the appropriate folder.
Moving the cursor to the right side allows you to load single ele-
ments in one of two ways:
1. Press LOAD, (F3) while the cursor is on the name of
the single element in the right side of the display. It will