Generalmusic 271221 Owner's Manual page 161

apply extra pressure to a key already being held down. Only 1V
is used to show how much aftertouch was applied at the speci-
fied time. The range is from 0 to 127.
NOTE: Since many of the Equinox's internal sounds are pro-
grammed with this feature on, you may often generate a large
quantity of MONO TOUCH EVENTS without realizing that you're
doing so. The generation of MONO TOUCH EVENTS can be
disabled before commencing a recording by turning off the AF-
TERTOUCH function in the PERFORM / OTHER option and stor-
ing your changes. Alternatively, accidentally recorded MONO
TOUCH EVENTS may be "stripped out" of any offending track
by using the ERASE EVENTS function and setting "Mono Touch"
as the EVENT TYPE.
PROGRAM CHANGE
If you change a sound while recording, this change will be re-
flected in the event list by the addition of a PROGRAM CHANGE
EVENT . This event displays 1V, 2V and 3V values. For Equinox
internal sounds however, only 1V and 2V need to be considered,
(3V is only used when addressing extended sound libraries on
external instruments). The value of 1V is the actual location of
the sound from 1 to 128 while the value of 2V tells the instrument
which bank to take the sound from. Therefore, in the above ex-
ample, the PROG EVENT is being used to select sound #35
from the 3rd bank, (BANK C - SYNTH 3).
Sequencer 11•29