Generalmusic 271221 Owner's Manual page 22

Selection, Navigation and Data Entry
In Play modes, the Dial and the Cursor buttons operate as the
principal selection tools. In other modes (Sequencer, Function,
Edit, Store), these controls transform into navigating and data
entry devices.
Selection - the Dial and the Cursors
In Play mode, the Dial is the principal selection device (Sounds,
Performances, etc.). Clockwise rotation selects continually in in-
creasing numerical order, counter-clockwise rotation selects in
reverse order.
The Cursor Up/down buttons select items (Sounds, Perfs, etc.)
sequentially in single steps; the Up button in ascending numeri-
cal order, the Down button in descending order.
The Cursor Left/Right buttons activate a temporary window which
allows you to switch between banks (factory and user).
The Function buttons F1 - F4
The 4 buttons under the display select the functions that appear
at the bottom of many screens. Selecting one of these functions
will take you to a new edit environment.
Getting back to the main menu in a single step can be achieved
by pressing the MENU button, (F4), where applicable.
The Numeric Keypad
A secondary data entry tool is the numeric keypad (to the right of
the cursor buttons) which enters specific values.
Pressing any of these buttons activates an entry window where
you can type in the number required. Sometimes you may need
to enter two numbers separated by a dash (e.g. 55 - 2). In this
case, use the cursor right button to move to the right side of the
separator dash. When you've finished, confirm by pressing EN-
TER.
Also, for stepping through options in single steps, you can use
the Increase (>) and Decrease (<) buttons of the keypad.
12 Quick Guide