Table of Contents
Advertisement
Installation Adjustments
Loosen the four hexagon screws A, A', B and B', upper and lower
fixation latch. These screws fasten the cooling house of the red tube.
Pivot the red CRT until the center of the red image coincides with the
center of the green image. If the angle of the red CRT is corrected,
tighten the four bolts.
ENTER continues to blue and green crosshairs.
EXIT will return to CRT projection angle adjustment.
Loosen the four hexagon screws C, C', Dand D', upper and lower
fixation latch. These screws fasten the cooling house of the blue tube.
Pivot the blue CRT until the center of the blue image coincides with
the center of the green image. If the angle of the red CRT is corrected,
tighten the four bolts.
ENTER continues to the path selection menu.
EXIT returns to the CRT projection angle adjustment.
7 - 8
Screws A, B, C and D (M4) : upper
fixation latch. nutdriver 7mm.
Screw A', B', C' and D' (M4) : lower
fixation latch. nutdriver 7mm.
red crosshair
green crosshair
Move the red CRT
towards the green
CRT
red crosshair
green crosshair
Move the red CRT
to the outside, away
from the green CRT
blue crosshair
green crosshair
Move the bleu CRT
to the outside, away
from the green CRT
blue crosshair
green crosshair
Move the bleu CRT
towards the green
CRT
A' A
B
B'
C'
C
B
B'
C'
C
A'
A
CRT
PROJECTION ANGLE
ADJUSTMENT
Align crosshairs
<ENTER> continue
<EXIT> to return
CRT
PROJECTION ANGLE
ADJUSTMENT
Align crosshairs
<ENTER> continue
<EXIT> to return
5975987 BARCODATA 708 260597
D
D'
D
D'
Advertisement
Table of Contents
